Among the many types of DIY projects involved in beautifying one’s backyard, constructing a mini pond is one of the most popular. Due to the tranquil atmosphere and lush visual appeal provided by them, mini ponds have become an extremely popular addition to backyards; read below to learn how to install one in yours.
Find the Right Spot Allocate a place that will be best to see and enjoy your pond. Try to use an area that isn’t under a large tree where leaves and other debris are likely to fill it; if this is ever an issue, there are nets or screens to apply over the pond to protect it. Also, make sure that there are no cables or wires underneath the ground that you choose to use. Lastly, to be safe, contact your local government to ensure there are no specific precautions you should take before digging in your backyard.
Decide Size, Volume, and Depth Estimate how large of a pond you want. Once this is decided, you will want to find pond liner that will be able to cover the size you have set on. Just as important as the liner, though, is the underlayment; this will be used beneath the pond liner and help defend the liner against wear. Next, acquire a pump to keep the pond water fresh and flowing. The model of pump you use will be determined by the volume of your pond; read this guide for choosing the proper pond pump for a better idea of the specs that you will need.
Get Digging Now that you have a visualized plan of how you want it to look, it’s time to mark the blueprint of the pond. This can be done with spray paint or whatever tool works best for you. Next, get digging until you have created enough space and have the correct dimensions that you had in mind. Smooth out the bottom and walls; dislodge any sharp or jagged rocks.
Apply Underlayment and Liner Once measured to the size needed, ready your underlayment and liner. First, apply the underlay evenly throughout the surface of the hollowed out ground. Afterward, do the same with the liner by securely spreading it atop the underlay. Before moving onto the next step, make sure that your pump is set up and ready to go. If unsure how to install a pond pump, give this quick guide a look to learn.
Outfit the Perimeter Once completed, surround the perimeter of the pond with rocks, stones, and plants. These should offer a natural touch while also matting down the previously-set liner.
Add Water Now that the foundation of your pond is ready and everything is in place, it’s time to fill it up. As you add water, be sure to not fill the pond with too much at a time; observe the liner and rocks to make sure they stay in place. Lastly, turn on your pump and you’re ready to go!